GL.iNet Router SDK/netport — English @ Weblate for GL.iNet: First, please unplug the Ethernet cable that is plugged into …

	Key	English	Actions
	menu_netport	Network Port Management
	netport.rate_label	Negotiated Network Port Rate
	netport.unplug_cable_tips	First, please unplug the Ethernet cable that is plugged into the {silkprint}.
	netport.as_label	As {port}
	netport.wan_lan_change_tips	You can use the WAN port as a LAN port.
	netport.reset_port_tips	You can restore {silkprint} to {port} mode by holding down the reset button of the device for 4 seconds.
	netport.set_as_wan_tips	Once the {silkprint} is used as a WAN port
	netport.as_wan_tips	{asWan}, the device connected to the port can't access the admin panel anymore. You'll have to connect it to Wi-Fi or other LAN ports.
	netport.reset_as_wan_tips	Restore {silkprint} as WAN port.
	netport.reset_as_lan_tips	Are you sure to restore the {silkprint} to LAN port (default)?
	netport.set_as_lan_tips	Are you sure you want to switch {silkprint} to a LAN port?
	netport.no_wan_tips	{silkprint} have been used as LAN (Local Area Network).You can set it back to WAN (Wide Area Network) in {view}
	netport.two_port_label	{port1} and {port2}

	Key	English	Actions
	menu_netport	Network Port Management
	netport.as_label	As {port}
	netport.as_wan_tips	{asWan}, the device connected to the port can't access the admin panel anymore. You'll have to connect it to Wi-Fi or other LAN ports.
	netport.no_wan_tips	{silkprint} have been used as LAN (Local Area Network).You can set it back to WAN (Wide Area Network) in {view}
	netport.rate_label	Negotiated Network Port Rate
	netport.reset_as_lan_tips	Are you sure to restore the {silkprint} to LAN port (default)?
	netport.reset_as_wan_tips	Restore {silkprint} as WAN port.
	netport.reset_port_tips	You can restore {silkprint} to {port} mode by holding down the reset button of the device for 4 seconds.
	netport.set_as_lan_tips	Are you sure you want to switch {silkprint} to a LAN port?
	netport.set_as_wan_tips	Once the {silkprint} is used as a WAN port
	netport.two_port_label	{port1} and {port2}
	netport.unplug_cable_tips	First, please unplug the Ethernet cable that is plugged into the {silkprint}.
	netport.wan_lan_change_tips	You can use the WAN port as a LAN port.

Loading…

None

String updated in the repository

English

English 0 characters edited Current translation Translated

3 months ago

guanwang.pan

String added

English

English 0 characters edited Current translation Translated

6 months ago

Following checks are failing:
Mismatched exclamation mark: Hungarian, Hungarian

English	English
No related strings found in the glossary.

netport.unplug_cable_tips

6 months ago

3 months ago

6 months ago

netport/en.json, string 3