GL.iNet Router SDK/internet — English @ Weblate for GL.iNet: Tethering

Zen

	Key	English	Actions
	cable.pppoe_vlanid_tips	This settings entry is only required if the provider's PPPoE server requires the interface to use a tagged specific VLAN ID.
	cable.egderouter_mode_tips	Drop-in gateway is enabled. If you want to modify the Ethernet settings, please disable $$$$Drop-in Gateway$$$$ first.
	cable.change_to_lan_check_tips	First, please unplug the Ethernet cable that is plugged into the WAN port. $$$$ re-detect $$$$
	cable.change_to_wan_tips	Once the LAN port is used as a WAN port, you will not be able to access the administrator panel via this Ethernet port connected to the LAN port. Please ensure that your client can connect to Wi-Fi or other LAN port.
	cable.change_to_wan_tips2	You can restore the LAN port (so that it is no longer used as a WAN port) by pressing and holding the reset button on the device for four seconds.
	cable.no_wan_tips	No cable detected.
	cable.using_tips	{silkprint} status: Using as {port}. {changePort}
	cable.reset_port_tips	You can restore the {silkprint} by pressing and holding down the device's reset button for 4 seconds.
	cable.use_as_wan_tips	{asWan}, the device connected to the port can't access the admin panel anymore. You'll have to connect it to Wi-Fi or other LAN ports.
	cable.revert_as_lan_tips	Are you sure to restore the {silkprint} to LAN port (default)?
	cable.change_port_btn	Change to {port}
	cable.revert_port_btn	Restore to {port}
	cable.use_as_port_btn	Change the {silkprint} to {port}
	cable.revert_wan_tips	After you restore the WAN port
	cable.use_as_wan_silkprint_tips	Once the {silkprint} is used as a WAN port
	tethering.title	Tethering
	tethering.device	Device
	tethering.no_device_tips	No Tethering device found, Plug in your smartphone or USB Modem to start.
	repeater.title	Repeater
	repeater.known_net	Known Networks
	repeater.options	Repeater Options
	repeater.no_tips	Repeater (STA) is disabled.
	repeater.change_wifi	Switch Network
	repeater.allow_change	Allow Switching to Other Saved Networks
	repeater.allow_change_tips	If the option is enabled, the router will automatically connect to other saved networks when it is unable to connect to the current Wi-Fi network.
	repeater.antijam	Force 20MHz Bandwidth for 2.4G
	repeater.antijam_tips	If this option is enabled, the device will improve the stability of the connection by reducing the connection rate.
	repeater.lock_band	Band Selection
	repeater.lock_band_tips	If you manually select a band, the router will not scan or connect to any Wi-Fi that is using another band.
	repeater.join_wifi	Join Wi-Fi
	repeater.join_title	Join Network

	Key	English	Actions
	sms.send_error_msg3	Failed to send.
	sms.send_error_msg4	Send timeout.
	sms.send_error_msg5	The device doesn't support SMS Feature.
	sms.send_error_msg6	The current network environment doesn't support SMS Feature.
	sms.send_fail	Send failed
	sms.send_modem	Send Modem
	sms.send_new	Create New Message
	sms.send_sms	Send Message
	sms.sending	Sending
	sms.sent	Sent
	sms.title	SMS
	sms.to	Send to
	sms.unknown	Unknown
	tethering.device	Device
	tethering.no_device_tips	No Tethering device found, Plug in your smartphone or USB Modem to start.
	tethering.title	Tethering
	traffic.clear_warning_tips	After modifying any data limiting configuration, the data will be clear. Do you need to clear the data?
	traffic.data_cap_amout_label	Data Cap Amount
	traffic.data_reset_period_label	Data Reset Period
	traffic.data_used_label	{sim} Data Used
	traffic.data_used_total_tips	Used data is the data of the current SIM card slot.
	traffic.first_month_label	First Month
	traffic.modify_data_used_tips	The data statistics are for information only. Actual traffic is determined by your network operator and will appear on the bill provided by your network operator.
	traffic.modify_data_used_title	Modify {sim} Data
	traffic.no_saved_limit_tips	If you need to lock the SIM card based on data usage, turn on the "Save data when power off" switch.
	traffic.over_limit_tips	The current data used exceeds the data cap amount, please reset the data cap amount or calibrate the data manually, otherwise the network may be disconnected or the SIM card may be switched automatically.
	traffic.save_to_flash_label	Save data when power off
	traffic.save_to_flash_tips	If the switch is turned on, the data can be saved even after the device is powered off.
	traffic.second_month_label	Second Month
	traffic.sim_limit_title	{sim} Limit Settings

Loading…

No matching activity found.

Browse all string changes

Things to check

Multiple failing checks

Following checks are failing:
Unchanged translation: Polish, Hungarian, Italian, German

Reset

Glossary

English	English
No related strings found in the glossary.

String information

Key

tethering.title

String age

2 years ago

Last updated

a year ago

Source string age

2 years ago

Translation file

internet/en.json, string 28