GL.iNet Router SDK/multiwan — English @ Weblate for GL.iNet: Normal mode is used by default, low data mode traces …

Source string

Key

English

Needs editing

Skip

	Key	English	Actions
	multiwan.track_addr_label	Track IP
	multiwan.both_label	Both
	multiwan.flush_track_tips	If this option is enabled and the network interface changes, the router will refresh all existing data streams to ensure they are using the highest priority interface. This avoids unnecessary traffic loss, but can lead to an increase in network volatility (for example, some VPNs may not reconnect immediately).
	multiwan.flush_track_label	Forced Refresh Streams
	multiwan.enable_check_label	Enable Interface Status Track
	multiwan.interface_state_label	Network Status
	multiwan.balancing_warning_tips	At least two interfaces with non-zero load ratios must be configured for the balanced load to work properly. If there is no connectable Internet interface with a non-zero load ratio, the device will not be able to connect to the Internet.
	multiwan.track_mode_label	Low Data Mode
	multiwan.passive_label	Low Data Mode
	multiwan.sensitivity_label	Sensitivity
	multiwan.sensitivity_tips	This sensitivity determines the time interval for Internet status detection. It is recommended to use low sensitivity when Internet access is unstable to avoid frequent network switching; it is recommended to use high sensitivity when video or live streaming to ensure that you can switch Internet access quickly; switching to high sensitivity may result in network disconnection.Please adjust it with caution.
	multiwan.track_mode_tips	If this option is enabled, it will only track when there is an interface network error. It is recommended that this be enabled for interfaces that use data traffic billing.
	multiwan.network_tracking_title	{interface} Status Track
	multiwan.sensitivity_options_label	Sensitivity Options
	multiwan.det_mode_label	Detection Mode
	multiwan.det_mode_tips	Normal mode is used by default, low data mode traces only when an interface network error occurs, and strict mode determines the interface status only based on the results of a detect command from a public ip.
	multiwan.strict_mode_label	Strict mode
	multiwan.low_data_label	Low data
	multiwan.normal_label	Normal
	multiwan.strict _label	Strict

	Key	English	Actions
	menu_multiwan	Multi-WAN
	multiwan.available_condition_label	Change to Available Condition
	multiwan.balancing_desc	Load Balance: Uses multiple network interfaces at the same time to increase the total bandwidth of the router. Note that connections to the same application or site will usually only use one interface.
	multiwan.balancing_label	Load Balance
	multiwan.balancing_warning_tips	At least two interfaces with non-zero load ratios must be configured for the balanced load to work properly. If there is no connectable Internet interface with a non-zero load ratio, the device will not be able to connect to the Internet.
	multiwan.both_label	Both
	multiwan.det_mode_label	Detection Mode
	multiwan.det_mode_tips	Normal mode is used by default, low data mode traces only when an interface network error occurs, and strict mode determines the interface status only based on the results of a detect command from a public ip.
	multiwan.enable_check_label	Enable Interface Status Track
	multiwan.failover_desc	Failover: If the current, active link fails, the router will automatically switch to another network interface.
	multiwan.failover_label	Failover
	multiwan.fault_condition_label	Change to Failure Condition
	multiwan.fault_count	Fail $$$$ times
	multiwan.flush_track_label	Forced Refresh Streams
	multiwan.flush_track_tips	If this option is enabled and the network interface changes, the router will refresh all existing data streams to ensure they are using the highest priority interface. This avoids unnecessary traffic loss, but can lead to an increase in network volatility (for example, some VPNs may not reconnect immediately).
	multiwan.interface_state_label	Network Status
	multiwan.interval_label	Track Interval
	multiwan.low_data_label	Low data
	multiwan.mode_balancing_note	Note: Active connections or traffic are not redirected to match the load ratio.
	multiwan.mode_balancing_tips	The system will assign interfaces to new connections based on the load ratio.
	multiwan.mode_failover_tips	The router automatically selects the next available interface with the highest priority.
	multiwan.mode_label	Mode

Loading…

Alisa Translation changed GL.iNet Router SDK multiwan English	English Normal mode is used by default, low data mode traces only when an interface network error occurs, and strict mode determines the interface status only based on the results of a detect command from a public ip. English 1 character edited Current translation Translated Normal mode is used by default, low- data mode traces only when an interface network error occurs, and strict mode determines the interface status only based on the results of a detect command from a public ip. a month ago
Alisa Translation changed GL.iNet Router SDK multiwan English	English Normal mode is used by default, low-data mode traces only when an interface network error occurs, and strict mode determines the interface status only based on the results of a detect command from a public ip. English 64 characters edited Translated Normal mode is used by default, low-data mode trackes only when an interface network error occurs, and strict mode ~~accurately~~ determines the interface stateus only based on the results of a detect command from a public ~~ICMP/ICMPv6 responses~~ip. 4 months ago
Alisa Translation changed GL.iNet Router SDK multiwan English	English Normal mode is used by default, low-data mode tracks only when an interface network error occurs, and strict mode accurately determines the interface state only from public ICMP/ICMPv6 responses. English 195 characters edited Translated ~~检测模式的提示~~Normal mode is used by default, low-data mode tracks only when an interface network error occurs, and strict mode accurately determines the interface state only from public ICMP/ICMPv6 responses. 4 months ago
guanwang.pan Marked for edit GL.iNet Router SDK multiwan English	English 检测模式的提示 English 0 characters edited Needs editing 检测模式的提示 4 months ago
guanwang.pan String added GL.iNet Router SDK multiwan English	English 检测模式的提示 English 0 characters edited Translated 检测模式的提示 4 months ago