GL.iNet Router SDK/internet — English @ Weblate for GL.iNet: The networking status detection method is the same as that …

Zen

	Key	English	Actions
	modem.save_config_label	Save Settings
	modem.copy_config_btn	Clone and Edit
	modem.sim_slot_setting_title	SIM Card Slot Settings
	modem.auto_switch_label	Auto Switch
	modem.main_slot_label	Preferred SIM Card Slot
	modem.sim_profile_label	SIM {index} Settings
	modem.sim_no_profile_warning	No setting has been selected, it will be configured automatically.
	modem.choose_other_profile_btn	Other Settings
	modem.sim_failover_interval_label	Failover Interval
	modem.sim_failover_interval_tips	If the Internet connection is still not available after failover has occurred, the device will switch back to the preferred SIM slot and will only retry failover after this interval.
	modem.timing_check_main_sim_label	Checking Preferred Slot Status Scheduled
	modem.timing_check_main_sim_tips	If this option is enabled, the device will try to switch back to the preferred SIM slot at the specified time. This feature allows you to switch back to the preferred SIM slot when its internet connection is available.
	modem.check_main_sim_time_label	Switching Time
	modem.choose_current_slot_label	SIM Card
	modem.remove_profile_warning	Are you sure you want to delete the profile? The profile cannot be recovered after deletion.
	modem.set_detection_tips	The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$.
	modem.data_roaming_label	International Data Roaming
	modem.enable_band_filter_label	Enable Band Masking
	modem.band_filter_mode_label	Masking Mode
	modem.band_masking_label	Block
	modem.band_only_label	Open
	modem.band_only_tips	In "Open" mode, the router will only use the bands, the others will be blocked.
	modem.band_masking_tips	In "Block" mode, the router will block the following bands.
	modem.band_only_warning	Please select at least one of the allowed bands.
	modem.current_badge_label	Current
	modem.current_sim_badge_label	Active: SIM {sim}
	modem.excellent_singal_label	Excellent
	modem.good_singal_label	Good
	modem.fair_singal_label	Fair
	modem.poor_singal_label	Poor
	modem.no_sim_tips2	Your SIM card has not been detected. Please check that the card has been inserted correctly and that the contacts are clean.

	Key	English	Actions
	modem.port_tips	The cdc-wcdm0 port is faster, and the ttyUSBX port has better compatibility.
	modem.protocol_tips	The QCM/QMI protocol are faster, and the 3G protocol has better compatibility.
	modem.reboot_buildin_modem_btn	Reboot Build-in Modem
	modem.reboot_buildin_modem_warning	Are you sure want to reboot the built-in Modem ?
	modem.reboot_this	Reboot Modem
	modem.region_code_label	Country / Region Code
	modem.remove_profile_warning	Are you sure you want to delete the profile? The profile cannot be recovered after deletion.
	modem.reset_count	Clear Statistics
	modem.save_as_profile_title	Save as Profile
	modem.save_config_label	Save Settings
	modem.saved_config_title	Saved Profiles
	modem.scan_tower_msg	This may take a few minutes. Please be patient.
	modem.select_profile_desc	You can $$$$ Select a Profile $$$$ to copy the contents of it to the settings used by the SIM card.
	modem.select_profile_title	Select Profile
	modem.service	Service
	modem.set_detection_tips	The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$.
	modem.setting	Cellular Settings
	modem.setting_sim_title	Settings Used by SIM
	modem.signal	Signal
	modem.sim_failover_interval_label	Failover Interval
	modem.sim_failover_interval_tips	If the Internet connection is still not available after failover has occurred, the device will switch back to the preferred SIM slot and will only retry failover after this interval.
	modem.sim_lock	SIM card has been locked, please input the PIN code to unlock it.
	modem.sim_no_profile_warning	No setting has been selected, it will be configured automatically.
	modem.sim_not_registered	SIM card not registered
	modem.sim_not_setup_label	Not Setup
	modem.sim_profile_label	SIM {index} Settings
	modem.sim_slot_pin_mark_tips	The SIM card slot has been marked and cannot be automatically switched.
	modem.sim_slot_setting_title	SIM Card Slot Settings
	modem.sim_slot_switching_tips	SIM card slot switching…
	modem.sim_tower_title	SIM {sim} Tower

Loading…

Alisa Translation changed GL.iNet Router SDK internet English	English The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$. English 5 characters edited Current translation Translated The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$. 2 weeks ago
Alisa Translation changed GL.iNet Router SDK internet English	English The networking status detection method is the same as that configured in the $$$$ Multi-WAN $$$$. English 17 characters edited Translated The networking status detection method is the same as that configured in the $$$$ Multi~~line Load page at~~-WAN $$$$. 2 weeks ago
Alisa Translation changed GL.iNet Router SDK internet English	English The networking status detection method is the same as that configured in the $$$$ Multiline Load page at $$$$. English 53 characters edited Translated The ~~Internet~~networking status is detect~~ed in~~ion method is the same ~~way~~ as th~~e settings~~at configured in the $$$$ Multi~~-WAN$$$$ page~~line Load page at $$$$. 2 months ago
yuxin.zou Translation changed GL.iNet Router SDK internet English	English The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$. English 90 characters edited ~~您可以$$$$前往多线负载页面$$$$修改检测方式和故障转移的次数。~~The Internet status is detected in the same way as the settings in the $$$$Multi-WAN$$$$ page. a year ago
guanwang.pan Marked for edit GL.iNet Router SDK internet English	English The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$. English 0 characters edited 您可以$$$$前往多线负载页面$$$$修改检测方式和故障转移的次数。 a year ago
guanwang.pan String added GL.iNet Router SDK internet English	English The networking status detection method is the same as that configured in the $$$$ Multi-WAN page $$$$. English 34 characters edited 您可以$$$$前往多线负载页面$$$$修改检测方式和故障转移的次数。 a year ago