GL.iNet Router SDK/bridge — English @ Weblate for GL.iNet: After successful bridging, if you need to access the web …

Source string

Key

English

Needs editing

Skip

	Key	English	Actions
	bridge.tips_one	When you change the router’s network mode, you may need to reconnect all of your client devices.
	bridge.tips_two	When you use $$$$ mode, you will not be able to connect to this UI again. You can press and hold the reset button for 4 seconds to revert to router mode.
	bridge.mode_switch	Mode Switch
	bridge.router	Router
	bridge.ap	Access Point
	bridge.wds	WDS
	bridge.ssid	Wi-Fi Name (SSID)
	bridge.password	Password
	bridge.holder_choose	Please Choose
	bridge.access_router	Accessing Your Router
	bridge.access_router_wds_tips	After bridging is successful, your router will automatically obtain an IP address from the main router. If you need to access this router's UI, you must connect using the IP address that was issued by the main router. To get this IP, check the connected clients list in your main router's UI. If you do not have access to the main router's UI, you can restore the routing mode by holding down the reset button for 4 seconds.
	bridge.access_router_ext_tips	After successful bridging, if you need to access the web of this router, you can access the web through the gateway of this router. if you cannot access it, you can restore the routing mode by pressing and holding the reset button for 4 seconds.
	bridge.reset_mac_tips	Please reset your MAC to factory MAC in MAC clone.
	bridge.set_up_ap_tips	To set up Access Point mode, you need to connect an Ethernet cable to the WAN port first.
	bridge.remove_wan_tips	Please remove the Ethernet cable from the WAN port.
	bridge.enter_pwd_tips	Please enter password
	bridge.choose_ssid_tips	Please choose SSID
	bridge.router_desc	Create your own private network. The router will act as NAT, firewall and DHCP server.
	bridge.relay	Extender
	bridge.ap_desc	Connect to a wired network and broadcast a wireless network.
	bridge.relay_desc	Extend the Wi-Fi coverage of an existing wireless network.
	bridge.wds_desc	Similar to Extender, please choose WDS if your main router supports WDS mode.
	bridge.connet_fail_msg	Connection failed.
	bridge.lan_conflict_msg	The LAN subnet conflicts with the Wifi subnet to be connected, please set a different subnet.
	bridge.get_ip_fail_msg	Failed to get IP.
	bridge.bridge_pattern_label	Bridge
	bridge.bridge_pattern_desc	Connect to a wired network.

	Key	English	Actions
	bridge.access_router	Accessing Your Router
	bridge.access_router_ext_tips	After successful bridging, if you need to access the web of this router, you can access the web through the gateway of this router. if you cannot access it, you can restore the routing mode by pressing and holding the reset button for 4 seconds.
	bridge.access_router_wds_tips	After bridging is successful, your router will automatically obtain an IP address from the main router. If you need to access this router's UI, you must connect using the IP address that was issued by the main router. To get this IP, check the connected clients list in your main router's UI. If you do not have access to the main router's UI, you can restore the routing mode by holding down the reset button for 4 seconds.
	bridge.ap	Access Point
	bridge.ap_desc	Connect to a wired network and broadcast a wireless network.
	bridge.bridge_pattern_desc	Connect to a wired network.
	bridge.bridge_pattern_label	Bridge
	bridge.choose_ssid_tips	Please choose SSID
	bridge.connet_fail_msg	Connection failed.
	bridge.enter_pwd_tips	Please enter password
	bridge.force_subnet_label	Force 24 Subnet
	bridge.get_ip_fail_msg	Failed to get IP.
	bridge.holder_choose	Please Choose
	bridge.lan_conflict_msg	The LAN subnet conflicts with the Wifi subnet to be connected, please set a different subnet.
	bridge.mode_switch	Mode Switch
	bridge.passthrough_close_warning	If you switch to this mode, Repeater, Wireless, Clients, VPN, and AdGuard Home will be disabled.

Loading…

Alisa

Translation changed

English

English 127 characters edited Current translation Translated

5 days ago

Alisa

Contributor joined

Contributor joined 5 days ago

None

String updated in the repository

English

English 303 characters edited Translated

a year ago

Browse all string changes

Things to check

Multiple failing checks

Following checks are failing:
Has been translated: Spanish, Lithuanian

Reset

Long untranslated

The string has not been translated for a long time

Reset

Glossary

English	English
No related strings found in the glossary.

String information

Key

bridge.access_router_ext_tips

String age

a year ago

Last updated

5 days ago

Source string age

a year ago

Translation file

bridge/en.json, string 12